Measured, made and fitted

Hinged-door wardrobes in Dénia

We can assist you inEspañolEnglishDeutschРусский

Hinged-door wardrobes in Dénia. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.

Plan my project → WhatsApp

The spaceA front-facing photo
DimensionsWidth, height, depth
StorageWhat it needs to hold

Designed for your space

Full access where the bedroom allows the doors to swing

A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Designed for the space

Dimensions and layout are checked against the room and your priorities.

Choices explained

We compare suitable materials and hardware before the specification is approved.

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

One project contact

Your contact coordinates questions about the proposal and the next steps.

Manuel PascualYour contact in Dénia

Your project starts here

Put the plan in order before choosing finishes.

I'm Manuel Pascual. If you have several ideas and aren't sure where to begin, write to me. I'll help you separate the essentials from the extras and define a clearer scope for the enquiry.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Designed from the inside

Each door should correspond with the wardrobe interior it opens

More doors do not guarantee better access. We detail width, hinges, handles and modules so the elevation remains proportionate and practical. In Dénia, it is tested against coastal humidity, bright interiors, mixed building ages and access through busy residential areas.

Swing clearance

Sequence matters. First, we draw every door open against the bed, bedside table, wall and entrance door. The second condition: the user can stand in front without becoming trapped.

Proportionate door width

We relate door count to modules, height and elevation rhythm. The doors do not become heavy or fragment the elevation without reason.

Sized hinges

We select hinge quantity and type according to height, weight and opening once dimensions have been checked. The direct consequence: each door retains alignment and adjustment through use.

Fully visible interior

The decision starts with day-to-day use: we align the door, division and pull-out accessories. The intended result is this: drawers, rails and baskets remain accessible without overlap.

Planning scenarios

Three bedrooms where door swing changes the design

A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for town apartments, village houses, villas and properties used seasonally.

Custom hinged-door wardrobes for shared wardrobe in Dénia

Scenario 01 · La Pedrera

Six doors giving full view of each module

A nominal dimension is not enough here. We divide the elevation around personal interiors and one shared zone. After the review, each person opens their module without moving another door. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Starting point: Geometry sets the limit. Within it, we confirm the distance to the bed and both bedside tables. The answer must meet one condition: every door has a clear swing.
Decision: From the first proposal, we assign one or two doors to each group of rails, drawers and shelves. The expected outcome: the elevation explains the internal organisation. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.
Before manufacture: With the recess verified, we test handles, simultaneous opening and access to lower drawers. Approval depends on one clear result: two users can use the wardrobe without conflict.

Custom hinged-door wardrobes for end beside a wall in Dénia

Scenario 02 · La Xara

A final door that opens without striking the wall

The drawing records how we allow separation, an opening restriction or a proportionate trim. A later review leaves one clear criterion: the handle and edge do not mark the perpendicular wall. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Starting point: The drawing records how we measure the side wall, skirting, switch and handle projection. A later review leaves one clear criterion: the conflict is known before component planning.
Decision: We adjust the trim, hinge and maximum angle of the end door. The module retains a comfortable opening.
Before manufacture: We review drawers and accessories against the available angle before the drawing is closed. Once that decision is made, the swing restriction does not create another internal obstruction. The actual property conditions in Dénia take priority over a catalogue solution.

Custom hinged-door wardrobes for tall door in Dénia

Scenario 03 · Jesús Pobre

Continuous panels with correctly specified hinges

We calculate weight, stiffness, hinges and adjustment points during design. The detail is resolved when the result is clear: the vertical composition does not lose stability. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Starting point: We measure height, level variation and allowance between door, floor and ceiling. One condition still applies: the panel can swing without rubbing. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.
Decision: During design, we choose substrate, thickness and hinge quantity for the intended finish. The drawing can progress once this result is clear: weight and deflection remain controlled.
Before manufacture: A catalogue does not decide this point. We confirm transport and space for offering up the door during fitting. The important result is simple: the component arrives, hangs and adjusts safely.

Configuration gallery

Examples of hinged-door wardrobes

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Hinged-door wardrobes in Dénia: white custom wardrobe with hinged doors — 01
**White custom wardrobe with hinged doors**Smooth floor-to-ceiling fronts sit neatly within a bedroom in Dénia with original patterned tiles

Hinged-door wardrobes in Dénia: full-wall walnut hinged wardrobe — 02
**Full-wall walnut hinged wardrobe**Tall doors and slim black handles form a warm composition beside the balcony

Hinged-door wardrobes in Dénia: olive-green hinged wardrobe in an alcove — 03
**Olive-green hinged wardrobe in an alcove**Three pairs of doors use a contained wall without narrowing the route around the bed

Hinged-door wardrobes in Dénia: light-oak custom hinged wardrobe — 04
**Light-oak custom hinged wardrobe**Careful side and ceiling fillers complete a clean installation in a bedroom with exposed beams

Hinged-door wardrobes in Dénia: classic hinged wardrobe with fitted interior — 05
**Classic hinged wardrobe with fitted interior**An open door reveals a rail, shelves and drawers behind warm-white fronts and brass handles

Hinged-door wardrobes in Dénia: compact custom wardrobe for a small bedroom — 06
**Compact custom wardrobe for a small bedroom**Two hanging rails, an upper shelf and drawers organise daily clothing in a narrow module

Hinged-door wardrobes in Dénia: hinged wardrobe fitted around a structural column — 07
**Hinged wardrobe fitted around a structural column**Different-width modules absorb the projection while keeping every storage section accessible

Hinged-door wardrobes in Dénia: l-shaped custom hinged wardrobe — 08
**L-shaped custom hinged wardrobe**The layout turns across two walls with compatible door swings and useful corner storage

Hinged-door wardrobes in Dénia: hinged wardrobe beneath a sloping roof — 09
**Hinged wardrobe beneath a sloping roof**Stepped doors, shelving and a rail follow the pitch to recover storage within the eaves

Hinged-door wardrobes in Dénia: bridge wardrobes around the bed — 10
**Bridge wardrobes around the bed**Side towers and overhead cupboards free floor space while retaining straightforward hinged access

Hinged-door wardrobes in Dénia: hinged hall wardrobe with shoe storage — 11
**Hinged hall wardrobe with shoe storage**Coats, shoes and bags share a full-height cupboard, bench and ventilated drawers

Hinged-door wardrobes in Dénia: oak wardrobe with woven-cane hinged fronts — 12
**Oak wardrobe with woven-cane hinged fronts**Natural fibre ventilates the interior and adds texture to a warm coastal-home scheme

Hinged-door wardrobes in Dénia: custom wardrobe with a concealed office — 13
**Custom wardrobe with a concealed office**Two hinged doors hide the desk, sockets, task lighting and shelves after the working day

Hinged-door wardrobes in Dénia: premium illuminated walnut wardrobe — 14
**Premium illuminated walnut wardrobe**Two open compartments reveal hanging rails, drawer units and warm lighting behind matched veneer fronts

Hinged-door wardrobes in Dénia: adaptable hinged wardrobe for a teenager — 15
**Adaptable hinged wardrobe for a teenager**Adjustable shelves, a rail, drawers and a side bookcase let the storage change over time

Hinged-door wardrobes in Dénia: shallow hinged utility wardrobe — 16
**Shallow hinged utility wardrobe**One door opens onto household linen, cleaning storage and an ironing-board slot in a narrow corridor

Instagram

A closer look at our studio

How a hinged wardrobe elevation changes

Width, height, handle and hinge produce different demands. The storage interior sets the most useful rhythm. The actual property in Dénia completes the choice.

Configuration	Usually solves	Critical check
Two wide doors	Planning scenario: Short wardrobe with broad access	Check before deciding: Weight and swing space
Four or six doors	Most frequent use: Long wall with clear modules	The proposal must resolve: Rhythm, junctions and simultaneous opening
Full-height door	Frequent application: Continuous vertical elevation	Verified during the survey: Stiffness, hinges and floor clearance
Separate top cupboard	Suitable situation: Daily storage below, seasonal above	Worth checking: Horizontal line and access
Applied handle	Primary role: Direct opening and visible detail	The site survey tests: Projection, impact and ergonomics
Finger pull or push	The option is assessed for: Quieter elevation	The drawing identifies: Grip, fingerprints and adjustment

Written scope

What the hinged wardrobe project includes

The proposed solution shows the elevation closed and open, allowing swing, access and layout to be approved ahead of fabrication.

Room survey

To settle this decision without improvising on site, we survey the wardrobe, bed, bedside tables, doors, windows, sockets and route. The result can then be checked: each door swing starts from the complete room.

Elevation design

During design, we agree quantity, width, height, joints, handles and horizontal lines. The drawing can progress once this result is clear: the elevation responds to the wardrobe interior and wall proportion. In Dénia, this decision is also checked against coastal humidity, bright interiors, mixed building ages and access through busy residential areas.

Coordinated interior

Geometry sets the limit. Within it, we align modules, rails, drawers and accessories with each opening. The answer must meet one condition: all contents are reached through the corresponding door.

Hinges and opening

We specify load, hinge quantity, closing, restriction and adjustment. The decision is recorded. The final reference: the intended movement is documented.

Manufacture and finishes

We close substrate, thickness, lacquer, veneer, board, mirror and edges. The decision is recorded. The final reference: the door retains flatness and durability.

Fitting and alignment

We hang, adjust gaps, check closing and review rubbing points. One condition still applies: the elevation is handed over level and functional.

Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Dénia is added only after it has been explained and priced.

A verifiable plan

Door swing is validated before the workshop slot

Door count, height, finish, hinges, interior and fitting space change cost and programme. In Dénia, we also confirm coastal humidity, bright interiors, mixed building ages and access through busy residential areas.

Four milestones before handover

01
Initial feasibility
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
02
Measured design
The room, opening, access and door movement are checked before the layout and elevation are approved.
03
Accepted scope
Drawings, finishes, hardware, included work and project estimate are accepted before fabrication is booked.
04
Coordinated handover
Delivery, protection, installation, adjustment and final review are coordinated in Dénia. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Where the investment changes

Quantity and format

Before this part is approved, we evaluate wide doors, higher door counts, top cupboards and continuous panels. The objective is clear: the selected composition reflects its actual work.

Hinges and closing

Instead of assuming a standard answer, we size hinges, soft closing, push catches, restrictors and accessories. The intended result can be stated plainly: each mechanism relates to weight and frequency.

Finish and handles

The drawing records how we assess side by side board, lacquer, veneer, mirror, finger pulls and applied handles. A later review leaves one clear criterion: preparation, edging and machining appear in the included work.

Interior and fitting

The proposal becomes more coherent when we include carcasses, equipment, access, hanging, adjustment and review. The requirement remains unchanged: the elevation is assessed as part of the complete wardrobe. The approach is adapted to town apartments, village houses, villas and properties used seasonally, without turning location into a preset style.

Property and access · Dénia

The Dénia context changes the breakdown, not the standard

Projects may involve town apartments, village houses, villas and properties used seasonally. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

Les Marines and Les Rotes: reading the property

For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

Access and component sizes around Montgó

Coastal humidity, bright interiors, mixed building ages and access through busy residential areas can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

Everyday use from La Pedrera to La Xara

The recommendation continues to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Details you can verify

Identifiable contact and written project conditions

We publish how to contact us and when the team is available. Project-recorded particulars in Dénia are recorded before manufacture.

Project management

The MMV Studio project team receives enquiries from Dénia and assigns a project manager to coordinate the survey, project approach, finishes and fitting.

Published contact

You can identify the channel before sending information: mueblesamedidadenia.es, MMV Studio and proyectos@mueblesmedidavalencia.es. Legal information is linked in the footer.

Enquiry hours

Enquiry hours: Monday–Friday 09:00–13:00 / 14:00–20:00. Saturday 10:00–13:30 / 16:00–19:30.

Documented coverage

The guarantee is not reduced to a broad promise: limits, period, components and care requirements appear in the approved order.

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Dénia office by appointment.

Read the legal notice → See all published reviews →

Manuel PascualYour contact in Dénia

The next step

Let's clarify what you need.

Mark what is essential and what could wait for another phase. I'll help you organise the enquiry so you can assess the scope without mixing priorities and extras.

Scope and terms are confirmed before you place an order.

Request a proposal Ask a question

Questions before the survey

Questions about custom hinged-door wardrobes in Dénia

Can a wide door be divided?＋

Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.

What do I need for an initial enquiry?＋

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?＋

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.