A considered local project

Sliding-door wardrobes in Dénia

We can assist you inEspañolEnglishDeutschРусский

Sliding-door wardrobes in Dénia. Overlapping leaves must not prevent drawer or accessory use. The accessible section is checked for each door position.

Plan my project → WhatsApp

The spaceA front-facing photo
DimensionsWidth, height, depth
StorageWhat it needs to hold

Designed for your space

The door saves floor space but changes access

Door width, overlap, tracks and internal divisions must align so drawers and pull-outs can open. The proposal continues to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Designed for the space

Dimensions and layout are checked against the room and your priorities.

Choices explained

We compare suitable materials and hardware before the specification is approved.

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

One project contact

Your contact coordinates questions about the proposal and the next steps.

Manuel PascualYour contact in Dénia

Your project starts here

Put the plan in order before choosing finishes.

I'm Manuel Pascual. If you have several ideas and aren't sure where to begin, write to me. I'll help you separate the essentials from the extras and define a clearer scope for the enquiry.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Interior decisions

Door movement organises the entire wardrobe

A continuous elevation can look very calm, provided it does not hide the module you need. We design the doors and interior as one mechanism. In Dénia, it is tested against coastal humidity, bright interiors, mixed building ages and access through busy residential areas.

Calculated overlap

We establish door width, number of leaves and overlap between profiles once dimensions have been checked. The direct consequence: each useful opening aligns with the module it needs to serve.

Accessible drawers

This is not about adding more modules. We position drawers, baskets and pull-outs away from profiles and overlapped zones. Usefulness is tested in one way: accessories open fully with a door in its intended position.

Stable tracks

First, we size profiles, rollers and support according to height, weight and finish. After that, the doors move without vibration or unnecessary effort.

Maintainable hardware

During design, we leave access for cleaning, adjustment and component replacement. The drawing can progress once this result is clear: the mechanism is not trapped behind irreversible finishing pieces.

From problem to drawing

Three sliding elevations with different access patterns

Door count is not chosen for appearance alone. It changes how much interior is visible and which items can pull out. The scenarios are adjusted for town apartments, village houses, villas and properties used seasonally.

Custom sliding-door wardrobes for two doors in Dénia

Scenario 01 · Montgó

A narrow bedroom with a simple opening

During design, we divide the interior and elevation into two compatible zones. The drawing can progress once this result is clear: one door clears the everyday module completely. For a property around La Xara, access and handling are reviewed before component sizes are fixed.

Starting point: We measure the distance to the bed, handles, curtains and entrance route by considering use and geometry together. Acceptance is based on this result: the sliding system saves space where it is genuinely needed.
Decision: We align rails and shelves with the opening left by each door. One condition still applies: no division remains trapped behind the central overlap. In Dénia, this decision is also checked against coastal humidity, bright interiors, mixed building ages and access through busy residential areas.
Before manufacture: We examine floor level, panel height and the route for bringing it in before the drawing is closed. Once that decision is made, the door can be installed and adjusted without distortion.

Custom sliding-door wardrobes for three doors in Dénia

Scenario 02 · La Pedrera

More modules with a central composition

This is not about adding more modules. We coordinate three opening positions with drawers and internal equipment. Usefulness is tested in one way: the elevation rhythm does not sacrifice useful access. The approach is adapted to town apartments, village houses, villas and properties used seasonally, without turning location into a preset style.

Starting point: We identify the most frequently opened module and which contents need pull-out access once dimensions have been checked. The direct consequence: the main zone receives the easiest opening.
Decision: This point is explained before pricing: we reserve the centre for a module compatible with the selected overlap. The later check confirms the essential result: drawers and baskets do not clash with profiles.
Before manufacture: The drawing records how we draw all three doors in their limit positions. A later review leaves one clear criterion: each use is tested with the elevation in motion. The approach is adapted to town apartments, village houses, villas and properties used seasonally, without turning location into a preset style.

Custom sliding-door wardrobes for tall panel in Dénia

Scenario 03 · La Xara

Floor-to-ceiling doors without losing stability

The drawing records how we balance weight, stiffness and visual division before choosing one continuous panel. A later review leaves one clear criterion: the desired height remains manageable and adjustable. The actual property conditions in Dénia take priority over a catalogue solution.

Starting point: The proposal becomes more coherent when we survey actual height, floor level and upper fitting allowance. The requirement remains unchanged: the door does not depend on an ideal dimension. The approach is adapted to town apartments, village houses, villas and properties used seasonally, without turning location into a preset style.
Decision: From the first proposal, we select a structure, profile and finish compatible with the size. The expected outcome: weight and deflection remain within a reliable solution.
Before manufacture: We confirm the lift, stairs, corridor and turn into the bedroom once dimensions have been checked. The direct consequence: the intended format can reach its final position.

Configuration gallery

Examples of sliding-door wardrobes

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Sliding-door wardrobes in Dénia: oak and woven-cane custom sliding wardrobe — 01
**Oak and woven-cane custom sliding wardrobe**Three breathable panels bring natural texture to a bedroom overlooking the centre of Dénia

Sliding-door wardrobes in Dénia: sage-green custom sliding-door wardrobe — 02
**Sage-green custom sliding-door wardrobe**Lacquered fronts and an oak interior organise clothing and drawers without crowding the desk area

Sliding-door wardrobes in Dénia: smoked-glass sliding wardrobe — 03
**Smoked-glass sliding wardrobe**Black profiles, warm lighting and transparent panels create a lighter solution for a Mediterranean bedroom

Sliding-door wardrobes in Dénia: dark-walnut custom sliding wardrobe — 04
**Dark-walnut custom sliding wardrobe**Continuous-grain panels cover the full wall while preserving the route towards the bathroom

Sliding-door wardrobes in Dénia: white sliding wardrobe with oak interior — 05
**White sliding wardrobe with oak interior**An open panel reveals hanging space, drawers and shelves within a compact floor-to-ceiling installation

Sliding-door wardrobes in Dénia: mirrored sliding wardrobe for a coastal bedroom — 06
**Mirrored sliding wardrobe for a coastal bedroom**The panels reflect sea light and visually widen a room with limited clearance around the bed

Sliding-door wardrobes in Dénia: natural-oak custom sliding wardrobe — 07
**Natural-oak custom sliding wardrobe**Three warm panels and an illuminated interior complete a calm full-wall storage scheme

Sliding-door wardrobes in Dénia: sliding wardrobe fitted around a column — 08
**Sliding wardrobe fitted around a column**A fixed side filler absorbs the projection so the doors can travel along one continuous level track

Sliding-door wardrobes in Dénia: shallow custom sliding wardrobe — 09
**Shallow custom sliding wardrobe**Beige fronts, shoe storage and drawers use the corridor between bedroom and bathroom without blocking it

Sliding-door wardrobes in Dénia: premium bronze-glass sliding wardrobe — 10
**Premium bronze-glass sliding wardrobe**Smoked glass, walnut and integrated lighting organise clothes, shoes and accessories in a master suite

Sliding-door wardrobes in Dénia: sliding wardrobe beside the bed — 11
**Sliding wardrobe beside the bed**Handle-free taupe panels keep the storage accessible even where the side passage is particularly narrow

Sliding-door wardrobes in Dénia: custom sliding hall wardrobe — 12
**Custom sliding hall wardrobe**Coats, bags, shoes and household items share one organised interior behind three cream fronts

Sliding-door wardrobes in Dénia: clay-lacquered sliding wardrobe — 13
**Clay-lacquered sliding wardrobe**Smooth panels read as one continuous wall while concealing a carefully planned birch interior

Sliding-door wardrobes in Dénia: walnut and glass sliding wardrobe for a suite — 14
**Walnut and glass sliding wardrobe for a suite**Natural veneer and bronze glazing balance display, drawers and warm lighting at sunset

Sliding-door wardrobes in Dénia: adaptable custom sliding wardrobe for a teenager — 15
**Adaptable custom sliding wardrobe for a teenager**Double rails, shelves, drawers and sports storage can be adjusted as daily needs change

Sliding-door wardrobes in Dénia: wardrobe concealed behind fluted sliding panels — 16
**Wardrobe concealed behind fluted sliding panels**One oak panel opens onto the fitted interior while the closed elevation reads as architectural wall cladding

Instagram

A closer look at our studio

Door count, usable opening and the checks that matter

More doors reduce individual panel size but add profiles and overlap positions. The best option depends on the storage interior. The actual property in Dénia completes the choice.

Configuration	Usually solves	Critical check
Integrated mirror	Usually considered for: Bedroom needing reflection and openness	The survey must confirm: Weight, safety and cleaning
Mixed panel	Worth considering where there is: Combination of lacquer, veneer or textile	The drawing identifies: Joints, thickness and stability
Full height	The option is assessed for: Continuous elevation to the ceiling	Critical point: Transport, stiffness and top allowance
Two wide doors	Typical context: Short wardrobe or two internal zones	Acceptance criterion: Door weight and central overlap
Three doors	Typical context: Medium elevation with central module	Check before deciding: Drawer access in every position
Four doors	Frequent application: Long wall or shared use	The survey must confirm: More joints and module alignment

Written scope

What the sliding wardrobe project includes

The project connects the elevation, interior and mechanism. The track is not selected after the carcasses are made.

Elevation survey

We record width, height, floor level, ceiling, sides and route in as part of the drawing rather than at the end. The practical consequence: the door format can be made and reach the bedroom.

Opening map

We draw each door closed and in its working positions by considering use and geometry together. Acceptance is based on this result: the modules visible in each movement are known. For a property around La Xara, access and handling are reviewed before component sizes are fixed.

Coordinated interior

The solution is tested in two stages. First, we align divisions, drawers and accessories with usable openings. Then, no pull-out is blocked by a profile.

Track system

The drawing records how we specify rollers, profiles, stops, supports and adjustment. A later review leaves one clear criterion: the mechanism matches door size and weight.

Panel and finish

A catalogue does not decide this point. We set out substrate, thickness, mirror, lacquer, veneer or combination. The important result is simple: the finish retains flatness and safety.

Fitting and testing

To settle this decision without improvising on site, we install, level, adjust, clean the tracks and test every opening. The result can then be checked: handover checks movement and interior together.

Wall reinforcement, floor correction, electrical work or removal of the previous elevation are listed separately when required. Any additional work identified in Dénia is added only after it has been explained and priced.

From drawing to fitting

Usable opening is approved before tracks are ordered

The budget depends on door count and size, mechanism, finish, interior and the difficulty of bringing panels to the room itself. In Dénia, we also confirm coastal humidity, bright interiors, mixed building ages and access through busy residential areas.

How the order moves forward

01
Useful enquiry
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
02
Technical survey
The room itself, opening, access and door movement are checked before the internal plan and elevation are approved.
03
Closed decisions
Drawings, finishes, hardware, included work and detailed quotation are accepted before the workshop slot is booked.
04
Adjusted installation
Delivery, protection, installation, adjustment and final review are coordinated in Dénia. For a property around La Xara, access and handling are reviewed before component sizes are fixed.

Where the investment changes

Number of doors

The proposal becomes more coherent when we contrast wider panels with three- or four-door compositions. The requirement remains unchanged: weight, joints and access are assessed together.

Mechanism and profiles

Geometry sets the limit. Within it, we size tracks, rollers, stops and profiles for each door. The answer must meet one condition: the quotation identifies the system supporting the use.

Panels and finishes

First, we review board, lacquer, veneer, mirror, glass and mixed materials. After that, weight, preparation and handling are included.

Interior and fitting

The door is not priced apart from the wardrobe it must serve. That is why we include carcasses, accessories, levelling, access, fitting and adjustment. The proposal must continue to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use.

Before the workshop · Dénia

Three local facts before manufacture in Dénia

Projects may involve town apartments, village houses, villas and properties used seasonally. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

Baix la Mar and Les Marines: reading the property

For custom sliding-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

Access and component sizes around Les Rotes

Coastal humidity, bright interiors, mixed building ages and access through busy residential areas can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

Everyday use from Montgó to La Pedrera

The recommendation continues to prioritise easy cleaning, sensible ventilation and a layout that works for both daily and holiday use. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Documented confidence

What you can verify before approving the order

We publish how to contact us and when the team is available. Project-project-specific facts in Dénia are recorded before workshop production.

Identity and contact

This website uses the trading name MMV Studio. Domain: mueblesamedidadenia.es. Project email: proyectos@mueblesmedidavalencia.es. The legal notice contains the formal details.

Team availability

You can write Monday–Friday, 09:00–13:00 / 14:00–20:00, or Saturday, 10:00–13:30 / 16:00–19:30.

Written guarantee

Coverage, duration, supplied elements, fitting conditions, maintenance and exclusions are set out in writing before workshop production.

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Dénia office by appointment.

Who coordinates the order

The MMV Studio project team receives enquiries from Dénia and assigns a project manager to coordinate the survey, proposal, finishes and fitting.

Read the legal notice → See all published reviews →

Manuel PascualYour contact in Dénia

The next step

Let's clarify what you need.

Mark what is essential and what could wait for another phase. I'll help you organise the enquiry so you can assess the scope without mixing priorities and extras.

Scope and terms are confirmed before you place an order.

Request a proposal Ask a question

Questions before the survey

Questions about custom sliding-door wardrobes in Dénia

Can sliding doors reveal the whole interior?＋

Usually part remains covered by another leaf. The interior is planned so pull-out elements can be used.

What do I need for an initial enquiry?＋

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?＋

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.